Axles - Moser 28 spline vs. stock 28 spline
07/29/05
Email Banning For more info

Notes:

• Both axles still use c-clips on ends of axles for retention. These Moser's are direct bolt-in units for stock axles.
• Notice how the Moser has two (2) sets of holes drilled for wheel studs (this was an option).
• Stock GM axles use 12mm x 1.5 wheel studs.
• Stock GM axles use PRESSED in studs, the Moser's use screw in studs (notice bolt head & lock washer).
• These Moser axles use 1/2" wheel studs (which are also much longer than stock GM).
• Notice how much longer the splines are on the Moser axles.
• Notice how the Moser's have thicker flanges on the end of the axles (where the wheel studs go in).

Pictures: (click on images to enlarge)